CCS EDC Two Watertight Compression Fittings - Not to Mate with Conduit

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

CCS EDC Two Watertight Compression Fittings - Not to Mate with ConduitThe Corning Cable Systems Environmental Distribution Center (EDC) series don't have cable entries holes provides. This fitting provides watertight entry for cables. Contents: Two watertight compression fittings. This fitting is not designed to mate with conduit. Note: The housing will have to be field modified to accept this fitting. This fitting is not included in the EDC closure kit and must be ordered separately.

3M highly recommends 3M™ Epoxy 8692 which is cured at 87°C or higher for 20 minutes minimum to meet Telcordia GR-326 requirements

6-volt alkaline battery

The Portable Video Fiber Optic Microscope can also be used with the optional Fiber Optic Video Microscope Probe to inspect those hard-to-reach fiber optic connectors

SC Bare Fiber Adapter Made by Mooseline

wipes and a fiber cleaver

0 90% (Storage) Power Consumption: 55W Dimensions(WxDxH): 440mm x 140mm x 89mm Weight: 3

hot swappable converters (allowing changing of individual cards during operation) Management: SNMP management module supporting console

the functions of both a digital optical phone and a stabilized light source

1x Anaerobic Primer (PN: 7649)

Eyelets fit shield connector studs up to 6 mm (1/4 inch) diameter

The Multilink Plastic Adjustable Sno-Shoe has been designed for slack storage at 90 degree location where the pole turns a corner

this unit eliminates the need to open the fiber at the splice point for identification

Exchange/Return Notes