Takaab LPF-3320 2/4pole Voltage Controlled Low-Pass Filter

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Takaab LPF-3320 2/4pole Voltage Controlled Low-Pass FilterA voltage controlled low pass filter based on the AS3320 filter chip. The LPF 3320 can be set to 2 pole or 4 pole mode and it has attenuated CV control over cutoff frequency and resonance. At high resonance settings the filter will self oscillate. With the cutoff CV attenuated, the filter responds to 1v octave and as it goes out the shop it is tuned to track over 6 octaves (potentially it can track all 10 octaves and you can tweak the scale on the

Most notably it gives attenuated CV inputs to control all parameters of the EG - Attack

the resulting all-analog design has A and B inputs (intended to receive up to two VCOs)

Each oscillator outputs both square(ish) and triangle waves

5A @ -12V | 1

the Ribcage gives 2 rows (6U) of either 84hp or 104hp of space for your modules

Therefore you can power them all using a single (larger) transformer

but the boards are drilled for M3 screws and a minimum of 3mm standoff from the mounting surface is required

The Takaab 2ATV is a simple and affordable DC coupled dual attenuverter module in 4HP

Version 1 legacy Information

Size: 3cm x 128

a number of SPS units can be connected together via 6mm spade terminals on the back of the unit

Size: (1U x 12HP) 60